Most lace bobbins with gingles are the type known as trolly bobbins. The gingles are bands of pewter that fit loosely in a groove round the bobbin, which allows them to rattle as they move. Pewter is an alloy of tin and lead and different proportions of the two metals were used by different bobbin makers. Trollies were used particularly in south Buckinghamshire to hold the gimp, or thick outlining thread, in Bucks point ground lace. The entire skein of gimp thread would be wound on to a quill bobbin, which was a small bobbin with a long neck. The gimp was then wound from the quill on to the trolly which, according to the lace historian Thomas Wright, was always surrounded with loose pewter rings called gingles.
Sometimes
these trolly bobbins are called Henry VIII’s referring to the Tudor king who
had six wives. The bobbin in the image above could therefore be called a Henry
VIII because it has six gingles, but the other bobbins in this blog could not
because they have fewer gingles. The trolly bobbin with six gingles was
probably made by Jonah, one of the Saunder brothers of Waddesdon who were
producing bobbins in the late 19th and early 20th centuries. He has left a
description of how he made these trollies by cutting grooves into the bobbin,
then wrapping the bobbin in brown paper. Molten lead was then poured between
the paper and the bobbin, and when it had cooled down, the surplus metal was
trimmed off on the lathe.
Most gingles
were made of pewter but I have one trolly bobbin with a wooden gingle. They
were probably turned on the lathe from one piece of wood rather than gingle
being added once the bobbin was finished. I was lucky to find these trollies
with their gingles still in place as in many cases the gingles have corroded or
broken and been lost. In fact the central bobbin in the top image may well have
had a third gingle originally, as there is an empty groove between the two
existing ones. The other ones in this blog must have been well made to have
lasted so long.



No comments:
Post a Comment